Sodium hydroxide is a colorless powder of alkaline origin, which is capable of corroding not only organic deposits, but also some metals, and when interacting with zinc, lead, tin, it can provoke an explosion. In trade objects, it is sold in the form of a gel, powder or granules. On the basis of caustic soda, special agents have been developed for cleaning sewer pipes from blockages. During use, caustic soda should not be allowed to come into contact with ammonia, as it is a fire hazardous mixture.

Caustic soda fights well with body fat, stubborn dirt and blockages. Given these properties, caustic soda is used for cleaning sewers, while it does not require special skills and special efforts. 

Sewer pipes can be cleaned on their own, for this it is necessary to pour a caustic soda-based substance into the system and wait a certain time for exposure.

These measures are recommended not only for cleaning pipes, but also as a prevention of blockages, which will ensure the smooth operation of sewage systems, as well as prevent the formation of deposits.

Most sewers are cleaned with caustic soda dissolved in water. To prepare this mixture, you need to know the proportions and observe precautions when working with chemicals. For autonomous sewers in private houses, it is recommended to use 3 kg of caustic soda powder per 7 liters of water.

Approximately 50% of the finished solution must be carefully poured into the drain hole, while it is important to ensure that caustic soda does not get on the surface of the plumbing, as it can destroy the top layer of the coating.

Leave to act for 2-3 hours, and during this time you need to refrain from using the sewer system. After this time, the remaining mixture is poured out and the time is waited again. At the end of all stages of cleaning the sewage system with caustic soda, it is necessary to rinse the pipes abundantly with cold water.

For apartment buildings, the same scheme for cleaning pipes with caustic soda applies as for the private sector, only the solution is poured out all at once and remains for exposure for several hours.

In the event that the blockage was not too strong, a single use of this mixture is enough, and if the deposits were very large, it is recommended to repeat the procedure after a few weeks.

The easiest way to unclog a sewer with caustic soda is to use a dry mix. To do this, there is no need to dissolve the powder in water, but it is enough just to pour it into the sewer pipe, while observing all the instructions. Initially, you need to pour 3 liters of hot water into the drain hole, and then pour out granules or powder, the amount of which will depend on the degree of contamination: from 2 tablespoons to a glass. Then 200 grams of water is poured and left to react for 3 hours. After this time, the entire system is flushed with cold water pressure.

This method is considered the simplest and most effective, but it is not suitable for all pipes, since the reaction takes place directly in the pipe, which can lead to its destruction, therefore, when using a dry substance, it is necessary to study all instructions for use provided by the manufacturer. You also need to use protective equipment so as not to damage the upper respiratory tract, eyes and skin.

You can clean the sewer pipes with caustic soda in the form of a gel. This method is the most harmless and at the same time less effective; it is widespread when carrying out preventive measures to combat blockages.

In many cases, it is necessary to use the most aggressive acidic agents to clean the sewage system, which can not only eliminate multilayer pollution, but also destroy pipes, therefore, caustic soda rinsing is used to neutralize the acid.

To do this, it is enough to pour a small amount of the substance into the sewer pipes and after a certain period of time rinse it off with plenty of water. Before using caustic soda to clean the sewage system, it is important to remember that it is capable of destroying organic pollution, and scale and insoluble salt deposits are beyond the power of this substance, it can also be used to clean plastic pipes, which caustic soda will not harm.  

In private homes, caustic soda is used in cesspools to get rid of excess liquid. The solution is poured directly into the sump, and after 3 days the liquid leaves, and only the sediment remains, which can be cleaned using a special transport.  

Caustic soda, caustic soda, caustic alkali, sodium hydroxide are used not only for domestic household use when cleaning pipes and sewers. The main volume of consumption of this product falls on its industrial use. 

Caustic is indispensable for cleaning sewer pipes, heat supply and other industrial facilities from various types of contaminants.

Including caustic soda effectively copes with the neutralization of acid in organic pollution, which are typical for sewer pipes.

That is why caustic soda is used at such facilities as thermal power plants, heating plants and other objects of the housing and communal sector.

In the case of industrial use of caustic for cleaning pipes, the principle of creating a working solution remains similar to that described above.

We once again remind you of the importance of observing all safety rules when using caustics!

Plant Basis offers its wholesale customers the most favorable conditions for imported chemical products, including caustic soda.

You can find out the details by filling out an application or contacting our sales department.